Water Stones By Pride Abrasives Made In USA

Pride Abrasives is a family-owned company that offers a comprehensive line of great water stones that are made in the USA.

All stones are 8″ x 3″ x 1″ thick and come in a wooden box. br>

For normal sharpening, we recommend starting with the1000 grit to form a wire edge; then jumping to 6000 grit to start polishing and abrading the wire; and finally finishing up with an 8000 or 10000 grit stone to complete the polishing process. You should continue with the final polishing stones until you cannot feel any wire edge and the surfaces are polished. A good rule of thumb is use your polishing stone until you think you are done, and then continue for a few minutes more. Then strop with a horse butt strop without any honing compound. (Stropping compound is typically coarser than either the 8k or 10k polishing stones.)

For faster results, especially on harder alloys, you might want to raise the wire starting with a 400 or 600 grit stone and then progress to 1000 grit stone.

For kitchen knives, starting with a 220 grit stone will raise a wire quickly. Stopping at 6000 or even 3000 should be fine for most kitchen knives, with the exception of fish knives, which benefit from as fine a polishing stone as you have.

All stones should be soaked before use for 10-15 minutes (or longer). For best results, use these stones with low pressure and keep the surface wet. Let the stone do the work!

Make up your own set! Purchase 3 or more Pride waterstones and receive a 10% discount. The discount will automatically show up in your basket.(Flattening plates are not included in this offer.)