FastCap 2P-10 Adhesive

Fastcap 2P-10 adhesive draws its name from its process: 2 parts, 10 seconds. Apply the adhesive, spray the activator and stick it together to get a very lasting, strong bond in 10 seconds. Plywood, melamine, you name it — 2P-10 can be used on any material that is clean with a surface that is oil free.

To use, get a bit of glue on the surface, rub it in a bit, then give a quick spray of the activator on the other surface to be adhered. Hold together for 10 seconds and prepare yourself to be astonished. Any excess glue can be dissolved and cleaned up with the Debonder.

The 2P-10 line includes different adhesives optimized for specific uses:

• Thin – to get into hairline cracks. Leaves zero glue line.
• Medium – for filling cracks (up to 1/8 inch). Great on laminates.
• Thick – for binding joints, filling holes and gaps
• Rubber Toughened Thick – Same uses as regular Thick, but 10% stronger. The rubber provides elasticity to joints.
• Jel – the no-drip formulation is great for trim carpentry and filling large gaps. Great for vertical surfaces.
• Rubber Toughened Jel – Same uses as regular Jel, but 10% stronger. The rubber provides elasticity to joints

Thin, Thick, Medium and Jel are also available in 10 oz containers. These containers are topped by the Multi-Tip Cap, which includes the Pin Tip, Flexible Tip and Storage Dock.

In addition, 2P-10 is also sold in kits.

The Solo Kit consists of 2.25 oz size of Thick and a 12 oz size of Activator.

The 2P-10 Kit consists of 2.25 oz size of Thin, Medium, Thick and Jel adhesives, a 2 oz Activator, 2 oz. Debonder and 5 microtips, 1 pump spray and 2 brushes.

Ground shipping only.